Weatherwood Polyurethane topcoat is specially formulated to protect your Weatherwood stained project, where protection is needed most. Weatherwood Stain’s Polyurethanes are high quality, urethane for the protection and of all raw or WeatherWood stained wood surfaces. WW Polyurethane is suitable for heavy traffic areas in the home, like hardwood floors, and do the best job of holding Weatherwood Stains' colors. The urethane allows the hard shell topcoat to expand and contract as your hardwood floors move over time.
Our topcoats our specially formulated for 3 things:
- Specially formulated to hold our weathered wood colors!
- Architectural quality for the highest degree of protection.
- Non-yellowing, water-based formula.
WW Polyurethane is non-yellowing, water-based formula for long-lasting coverage that's easy to apply. Perfect degree of coverage for HARDWOOD FLOORS. All finishes darken slightly. Weatherwood polyurethane comes in two sheens and the degree of sheen will have some affect the final color. The less sheen you choose, the closer you end project will look like the stained wood.
Polyurethane can be applied uses a brush, roller, squeegee, or spray gun depending on your job. You should plan to apply 2-3 coats of Varnish for superior wood protection, especially on high touch and water areas in the home.
Coverage Quart 100 sq. ft. / Gallon 400 sq. ft. / 5 Gallon 2000 sq. ft.
Check out a couple examples below, click on photos to enlarge for detailed info.