Featured Products

"I love Weatherwood Stains, my contractor said it was a breeze to work with and our client was thrilled with the results."

1 Pint Weatherwood Stains

$79.00

Add to Cart

WEATHERWOOD STAINS is a unique wood stain formula that creates the look of aged wood in only minutes. This wood stain is the first of its kind brought to market, formulated with both the green consumer and the end product in mind. WW changes the internal structure of the wood, creating a beautiful aged appearance without compromising the integrity of the wood.

WW is VOC free, toxin free, earth friendly.
WW contains no dyes, pigments or colorants.
WW has minimal odor and can be used without ventilation.

1 Pint Weatherwood Stains

$79.00

Add to Cart

1 Quart of Weatherwood Stains

$154.00

Add to Cart

1 Gallon Weatherwood Stain

$300.00

Add to Cart

5 Gallons Weatherwood Stain

$1,475.00

Add to Cart

WEATHERWOOD STAIN is a reactive wood stain, with distinctive, natural-looking warm gray coloration.

WW is an unique wood stain formula that actually transforms wood, creating the look of aged wood in only minutes. WW is a reactive stain works with the tannins within the wood, creating a beautiful aged appearance, without compromising the integrity of the wood. The color occurs within the wood, so unlike competitor stains, no pigments lay at the wood's surface.

WW is VOC free, toxin free, earth friendly.

WW contains no dyes, pigments or colorants.

WW has minimal odor and can be used without ventilation.

WW can be sealed with finish of your choice.

Offers up to 7 LEED points.

Download our Spec Sheet, here.

Call for more info or just order yours below!

801.427.4450 | 801.623-2609 Monday-Friday 8-6p MST

UNIFORMITY: Because WW is based on the natural tannins within the wood itself, as a result wood color, darkness and possibly hue will vary from board to board creating a beautiful and natural display. If you are uncertain this is the look you want, we recommend purchasing a 1/2 pint to create mock ups.

ORDERING: You can call in orders or order through the website. However, large orders will require a lead time. We ask that you order in advance of your project. We recommend that you order 15% more product than expect to use, to allow for waste during use.

LEAD TIME: Larger orders will require a lead time and 30 day lead time Due to WW's very popular nature, we ask that you give us as much notice as possible when planning to use WW. We are manufacturers and distributers for WW to ensure only the best end product for consumers. However, this limits production. Call to reserve your quantity to ensure the amount needed will be available for your job.

RETURNS: Unopened unit purchases can be returned within 30 (thirty) days of purchase. All approved returns are subject to a 30% restocking fee, plus freight to and from the originators destination. Returns of large orders require authorization. In this case you should call immediately to reconcile the issue. We cannot accept returns on opened items or items not in resalable condition.

DAMAGES: Damaged or non salable items will not be accepted for return. Items damaged during shipping must be documented *at the time of receipt and marked on the shipping slip as "Damaged" before the carrier leaves.

See our complete color chart here.

Are you in the wood industry?
Get your sample sets.

Need additional product facts, like LEED & VOC info?
Check it out here.

Weatherwood Stain Product Label
◘ FOR USE ON:	◘ Should be used only on bare, untreated wood; either sanded, unsanded or rough cut.
◘ SURFACE PREPARATION:	◘ APPLY TO RAW WOOD ONLY: Wood must be raw, free of paints and sealers. Remove any existing finishes by sanding sandpaper or paint stripper. If desired, prepare bare wood for staining by sanding in both directions with 80 grit sand paper the direction of the grain. Before staining, remove all sanding dust and dirt with a vacuum, tack cloth, or rag dampened.
◘ PRODUCT PREPARATION & COLOR TESTING:	◘ MIX WELL: Stir stain thoroughly before staining and occasionally during use to ensure that any settled materials are re-dispersed.
◘ COVERAGE:	◘ One gallon treats 350 sq. ft. of smooth wood, 250 sq. ft. of rough wood. TEST A PRODUCT BEFORE APPLYING: Apply a test sample on a small inconspicuous area before proceeding with the entire job, stain is reactive and color results are wood species dependent.

	WARNING! Removal of old paint by sanding, scraping or other means may generate dust of fumes, which can contain lead. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE DANGEROUS HEALTH EFFECTS, ESPECIALLY IN CHILDREN AND PREGNANT WOMEN. Controlling dust or fumes by using protective equipment (e.g. NIOSH-approved) is recommended. For more information about lead exposure call 1-800-424-LEAD.
◘ APPLICATION:	Apply generously with a paint sprayer, foam roller, or foam brush. If using a paint sprayer, spray wood with 4-6 passes, drenching wood. Wood will absorb the stain- do NOT apply and wipe off. Allow to penetrate for 5-10 minutes. Each wood species will obtain its own darkest shade after wood stain application. *See How to Apply for more information.
	Use only when air (ambient) temperature is between 60-90°F (16-32°C) and relative humidity is below 85%. Do not apply outdoors if rain is expected within 24 hours. Stir occasionally during use.
◘ DRYING TIME:	Wood may take from 10-120 minutes to dry. Allow for longer dry times during damp and humid climates. Wood will dry quickest in warm spray room with good air circulation. Soap and water cleanup is sufficient.
◘ FINISH PROTECTION:	As far as we know, all sealants are compatible with WW Stains - whether it be lacquer, clear coat, wax, shellac, etc. *See our color chart for Weatherwood and Topcoats
◘TROUBLESHOOT	IF WOOD YOUR WEATHERWOOD STAIN DRIES SPOTTY: - You may have sealed the wood by sanding too finely -You may have applied wood stain and wiped it back off. -You may have altered the chemical composition of the product or tried to water it down. To fix the problems, just sand wood with 80 grit in both directions to open up the wood. Then, reapply wood stain, drenching the wood and letting stain dry. *Do NOT store product in Metal Containers!

W▴W | WEATHERWOOD ▴ STAINS | Product Information

◘ FOR USE ON: Should be used only on bare, untreated wood; either sanded, unsanded or rough cut.
◘ SURFACE PREPARATION: Wood must be raw, free of paints and sealers. Remove any existing finishes by sanding sandpaper or paint stripper. If desired, prepare bare wood for staining by sanding in the direction of the grain. Begin with #120 grit sandpaper and progress though #150, #180 and #220 grits. Before staining, remove all sanding dust and dirt with a vacuum, tack cloth, or rag dampened.
◘ PRODUCT PREPARATION & COLOR TESTING: Stir stain thoroughly before staining and occasionally during use to ensure that any settled materials are re-dispersed.
◘ Apply a test sample on a small inconspicuous area before proceeding with the entire job, stain is wood species dependent and color results are dependent on type.
◘ COVERAGE: One gallon treats 350 sq. ft. of smooth wood, 250 sq. ft. of rough wood. WARNING! Removal of old paint by sanding, scraping or other means may generate dust of fumes, which can contain lead. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE DANGEROUS HEALTH EFFECTS, ESPECIALLY IN CHILDREN AND PREGNANT WOMEN. Controlling dust or fumes by using protective equipment (e.g. NIOSH-approved) is recommended. For more information about lead exposure call 1-800-424-LEAD.
◘ APPLICATION: Apply one coat of stain liberally with a paint sprayer, foam roller, or foam brush. Allow to penetrate for 5-10 minutes. Then, excess may be removed by wiping with a rag in the direction of the grain. Each wood species will obtain its own darkest shade after wood stain application.Use only when air (ambient) temperature is between 60-90°F (16-32°C) and relative humidity is below 85%. Do not apply outdoors if rain is expected within 24 hours. Stir occasionally during use.
◘ DRYING TIME: Wood may take from 120-240 minutes to dry. Drying wood can be handled without harm. Allow for longer dry times during damp and humid climates.
◘ FINISH PROTECTION: Product is a wood stain and needs a sealer to be protected. It is water-based and will not interact with finishes or sealers.
◘ CLEANUP: Soap and water cleanup is sufficient.